Đăng nhập

Từ khóa
Danh mục

Số sản phẩm : 0
Thành tiền : VND
Xem giỏ hàng

Máy kiểm tra lực nén Mark-10 - ESM301 - Mark-10 Việt Nam
Máy kiểm tra lực nén Mark-10 - ESM301 - Mark-10 Việt Nam - anh 1

Click vào ảnh lớn để zoom

Mã sản phẩm: ESM301
Giá : liên hệ
Bảo hành : 12 tháng

Số lượng    

Lượt xem: 423
ESM301/ESM301L Motorized Test Stands With PC Control

The ESM301 and extended length ESM301L are highly configurable motorized test stands for tension and compression testing applications up to 300 lbF (1.5 kN) for laboratory and production environments.

The stands can perform a wide range of tests, including break testing, cycling, limit testing to a load or distance, load holding, elongation testing, tensile testing, compression testing, and more. Satisfy various test methods through an easy-to-use menu, allowing the configuration of test speed, force and distance limits, cycling, preload, and many other functions. The stands can be controlled via its console or PC.

Functions are offered individually through a unique "build-your-own" configuration platform. Order any combination of functions to customize the stand to specific requirements. Functions not ordered originally can be activated in the field.

A password can be set to protect against unauthorized changes. Modular mechanical design allows the test frame and controller to be separated for various mounting configurations.

 

 
  
Data Sheet 
User's Guide 
    
   
 
gallery thumbnailgallery thumbnailgallery thumbnailgallery thumbnailgallery thumbnail  
                
 
gallery thumbnail  
                
 
gallery thumbnailgallery thumbnail      
                

 
  • Selectable speed units of measurement (in/min & mm/min)
  • LCD display with UP, DOWN, STOP, and emergency stop buttons and variable function keys
  • Password protection of test parameters, to prevent unauthorized changes
  • Integrated travel limit switches
  • Removable fixture mounting plate with matrix of threaded holes
  • Stepper motor-driven, produces 0% speed variation with load
  • Mounting holes for bench mounting
  • Unique mechanical design significantly reduces column bending
  • Programmable UP and DOWN button functions - momentary motion, maintained motion, or auto

 
  • A wide range of force gauges and gripping fixtures
  • Multi-function cables, gauge to controller (09-1162)
    Connects Series 7, 5 and Series 4 force gauges to the controller. This single cable is used to transmit set points, overload signals, and force data.
  • Serial cable, controller to PC (09-1056) 
    Sends force and travel data on a single cable via RS-232 to a PC.
  • RS-232 to USB adapter (RSU100)
  • Bench mounting kit (ESM301-003) 
    Consists of a set of mounting adapters, and four sets of hardware with Allen key to accommodate surfaces of various thickness. Recommended when ordering column extensions.
  • Column extensions (ESM301-002-1, -2, -3) 
    A spacer is supplied between the base and the column, increasing clearance between the force gauge and base (does not increase travel distance). Available in 6" (150 mm), 12" (300 mm), and 24" (610 mm), and custom lengths. Bench mounting kit is recommended
  • Frame-Controller connection cables (09-1137, -1, -2, -3) 
    Permit the removal of test frame from controller for alternative mounting configurations.
  • Competitor force gauge mounting kits
  • Eye end adapters
    Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges

 

Most of the below functions may be purchased at time of order or may be enabled in the field at a later date though a simple activation process. A complete options package is also available, including all of the below features at a discounted price. The stands are shipped in Demo Mode, during which time all available features are enabled for 160 hours of operation.

    
FeaturePart No.DescriptionRequirements
Travel indicationESM301-001
ESM301L-001		Travel is indicated on the front panel, and an RS-232 port is supplied. Position indication is provided via an internal linear scale, producing significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.
  • Order upfront, not field installable
Computer 
control		EF010A bi-directional RS-232 port is provided to interface with a PC. Users can write a custom program utilizing a library of ASCII commands or control the stand via a PC using legacy Nexygen TCD software (not available from Mark-10).
  • Series 5 or 7 force gauge
  • 09-1056 serial cable
  • 09-1162 cable
  • ESM301(L)-001 integrated travel indication
  • EF011 programmable travel set points
Programmable
travel limits		EF011The ESM301 can stop at or cycle between programmable upper and lower travel distances.
  • ESM301-001 or 
    ESM301L-001 travel indication option
Overload 
protection		EF012Protects a force gauge against overload. Program the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the ESM301 to interface with virtually any gauge with analog output.
  • Series 7, 5 or 4 force gauge
  • 09-1162 cable
Auto ReturnEF013The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the other limit.
  • Reversing at force set point: Series 7, 5 or 4 force gauge and 09-1162 cable
  • Reversing at travel limit: EF011 programmable travel limits option
  • Reversing at break: EF019 break detection option and 09-1162 cable
Cycling / dwell timeEF014Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds.
  • Same as auto-return. Requires EF016 for independent up and down speeds.
Independent Up 
and Down Speeds		EF016Configurable speeds for up and down directions.-
Low Speed 
Extension		EF017Extends the speed range to 
0.02 - 13 in/min (0.5 - 330 mm/min).		-
High Speed 
Extension		EF018Extends the speed range to 
0.5 - 45 in/min (13 - 1100 mm/min).		-
Break Detection1EF019Crosshead stops at a sudden drop in force. Programmable 
percentage of peak force.
  • Series 7 or 5 
    force gauge2
  • 09-1162 cable
Load Holding1EF020Dynamically adjusts the crosshead position to maintain a 
programmed load for an indefinite or specified period of time.
  • Series 7 or 5 
    force gauge2
  • 09-1162
  • If a specified time is required, order EF014 cycling option
Preload / Sample TouchEF021Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of
force gauge full scale. Three modes: (1) stop, (2) stop and zero, 
and (3) zero without stopping.
  • ESM301-001 or ESM301L-001 travel indication option
  • Series 7 or 5 force gauge2
  • 09-1162 cable
Complete Options PackageIncludes all Controller Features listed above
 

 
  • Load capacity: 
    300 lb (1.5 kN) @ up to 24 in/min (610 mm/min) 
    200 lb (1 kN) @ >24 in/min (610 mm/min)
  • Maximum travel distance: 
    ESM301: 11.5 in (292 mm) 
    ESM301L: 18 in (457 mm)
  • Speed range: 
    Standard: 0.5 - 13 in/min (13 - 330 mm/min) 
    Optional: 0.02 - 45 in/min (0.5 - 1100 mm/min)
  • Speed setting accuracy: ±0.2%
  • Speed variation with load: ±0% (stepper motor driven)
  • Travel accuracy*: ±0.002 in (0.05 mm)
  • Travel resolution: 0.001 in / 0.02 mm
  • Limit switch repeatability: 0.001 in (0.03 mm)
  • Power: Universal input 80-240 VAC, 50/60 Hz
  • Weight: 
    ESM301: 34 lb (15.4 kg) 
    ESM301L: 39.5 lb (23.7 kg)
  • Warranty: 3 years (see individual statement for further details)
  • CE mark
 
 

 

100% USA OriginMark-10 VietnamDigital force gauges
Model: M3-100 
Including accessores: Carrying case, chisel, cone, V-groove, hook, flat, extension rod, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD.
Unit weight: 0.3kgs
100% USA OriginMark-10 VietnamModel: BG05
Hiệu chỉnh Model BG05 là 263 USD (đã có 25% chiết khấu).
Note:
- Chi phí vận chuyển 2 chiều bên mình trả.
- Gía 263 chỉ bao gồm chi phí hiệu chỉnh và thay thế Load cell.
(- Gía mua mới của BG05 khi còn sản xuất là 1,145 USD chưa bao gồm 25% chiết khấu)
100% USA OriginMark-10 VietnamReplaced by: M5-05 
(Model: BG05)
100% USA OriginMark-10 VietnamModel: MTT01-100
100% USA OriginMark-10 VietnamModel: CT003
100% USA OriginMark-10 VietnamModel: CT002
STH10ZMark-10 VietnamCT005ESM301-001Mark-10 Vietnam 09-1063Mark-10 Vietnam
STH12Mark-10 VietnamCT006ESM301-001-RETROMark-10 Vietnam 09-1066Mark-10 Vietnam
STH20ZMark-10 VietnamCT007ESM301-002-1Mark-10 Vietnam 09-1180Mark-10 Vietnam
STH50Mark-10 VietnamCT100ESM301-002-2Mark-10 Vietnam 09-1143Mark-10 Vietnam
STH50ZMark-10 VietnamCT100EESM301-002-3Mark-10 Vietnam SF009 SF010 Mark-10 Vietnam
STJ100Mark-10 VietnamCT12ESM301-003Mark-10 VietnamSF011Mark-10 Vietnam
STJ10OZMark-10 VietnamCT12EESM301EMark-10 VietnamSF014 SF016Mark-10 Vietnam
STJ10ZMark-10 VietnamCT50ESM301LMark-10 VietnamSF020 SF021Mark-10 Vietnam
STJ12Mark-10 VietnamCT50EESM301L-001Mark-10 VietnamSF013 Mark-10 Vietnam
STJ20OZMark-10 VietnamCTA100ESM301L-001-RETROMark-10 VietnamSF019 Mark-10 Vietnam

 


Phản hồi

Người gửi / điện thoại

Nội dung

 
 

CÔNG TY TNHH THƯƠNG MẠI & DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: 602/41E Điện Biên Phủ, P.22, Q. Bình Thạnh, Tp. HCM

Tel: (Mr. Lên) 0914.573.068 - 0906.765.489     

Email: conglen.tmpvietnam@gmail.com     sale01@tmpvietnam.com

Website: tmpvietnam.com

Tự tạo website với Webmienphi.vn